Research Work Published in Other International Journals - 31* So Far

 Research Work Published in Other International Journals - 31* So Far

1.  Bhonagiri Ramesh, CH Bandhavi, Dr.Ram Subbiah, N.Sateesh (2020), Optimizing the Process Parameters of Drilling on Aluminium Alloy 7075 using Taguchi and Anova Techniques, International Journal of Innovative Technology and Exploring Engineering ISSN: 2278-3075, Volume-9 Issue-3, pp 2460 – 2464 (Scopus Indexed/ Removed from the scopus list at the time of publication)

 

2. Pradeepkumar, S.Jush Kumar, Dr. Ram Subbiah (2019), Determination Of Surface Characterstics On Micro-Edm Drilling Process Over Titanium Material, International Journal For Recent Development In Science And Technology, Volume 03, Issue 12, Dec 2019, PP 109-114. (UGC Care list - C)

3. G.Sainath, B.Venkatesh, Dr.Ram Subbiah (2019), Experimental Investigation and Optimization of Process Parameters in FDM Printed Carbon Fibre Reinforced PLA, International Journal For Recent Development In Science And Technology, Volume 03, Issue 12, Dec 2019, PP 115-121. (UGC Care List – C)

4.  S. Suresh, K. Siva Koteswara Rao, Dr.Ram Subbiah (2019), Prediction of Machining Parameters Incase of Nano Fluid Based MQL System, International Journal For Recent Development In Science And Technology, Volume 03, Issue 12, Dec 2019, PP 152-158. (UGC Care list - C)

5.      Y.Venkata Kesava Anil, Ajay Kumar, Dr.Ram Subbiah (2019), Experimental Investigation And Optimization Of Process Parameters In FDM Printed ABS Samples For UAV Application, International Journal For Recent Development In Science And Technology, Volume 03, Issue 12, Dec 2019, PP 189-192. (UGC Care list - C)

6.  P.Muralidhar, Dr.Ram Subbiah (2019) Mechanical Properties and Microstructural analysis of Stainless Steels (304 & 310) through dissimilar joining by TIG & SMAW, Journal for Recent Development In Science And Technology, Volume 03, Issue 12, Dec 2019, PP 193-196. (UGC Care List -C)

7. Dr.Ravi Sekhar S, Chittaranjan Das V, Dr.Govardhan D, Dr. Ram Subbiah (2019), Characterization of Friction Surfaced Deposits on Low Carbon Steel, International Journal of Engineering & Advanced Technology, Volume 9, Issue 1, PP No 1248-1251, ISSN: 2249 – 8958 (Scopus Indexed/ Removed from the scopus list at the time of publication)

8.  K. Lokesh, A. Anitha Lakshmi, Dr. Ram.Subbiah (2018) Wear Behaviour Analysis & Microstructure of AISI 440 Steel by Tempering Process: A Review, Global Journal of Engineering Science and Researches, http://www.gjesr.com/ICAME-2018, Page 113-116. (Thomson Reuters Indexed)

9.      Ch. Naveen, Ch. Bandhavi, Dr. Ram.Subbiah (2018) Modification of AISI 347 Stainless Steel Surface by Low Temperature Salt Bath Nitriding Process: A Review, Global Journal of Engineering Science and Researches, http://www.gjesr.com/ICAME-2018, Page 133-136. (Thomson Reuters Indexed)

10.  A.Arun, Dr.K.Satyanarayana, Dr.Ram.Subbiah (2018), Comparative Study Of Wear Behaviour On Al-2014 Alloy Coated With Thermal Spray Hvof (High Velocity Oxygen Fuel) and Plasma Spray Methods – A Review, Global Journal of Engineering Science and Researches, http://www.gjesr.com/ICAME-2018, Page 154-160. (Thomson Reuters Indexed)

 

11.  Md.Rahel, K.Siva Satya Mohan, Dr. Ram.Subbiah (2018) Investigation Of Wear Properties  on AISI D2 - Tool Steel By Various Heat Treatment Process - A Review , Global Journal of Engineering Science and Researches, http://www.gjesr.com/ICAME-2018, Page 171-175. (Thomson Reuters Indexed)

12.  Dr.Ram.Subbiah, G.Pooja, S.Pallavi, T.Likitha, Dr.R.Rajavel (2017), Investigation of 316L stainless Steel by flame hardening process, International Journal of Advanced Engineering, Management and Sciences, Volume 3, Issue 5, PP No 613-615. (Indexed by Thomson Reuters) – ISSN 2454-1311

 

13.  M.Balubai, Vamsi Kiran, V.Manil Reddy, Sai Reddy Gowtham, Dr.Ram Subbiah (2017),  A New Approach in Manufacturing of Reverse Vending Machine, International Journal of Advanced Engineering, Management and Sciences, Volume 3, Issue 7, PP No 738-740. (Indexed by Thomson Reuters) – ISSN 2454-1311

14.  Dr.Ram.Subbiah, M.Harini, M.Maneesha, Mohammed Jahangeer, Dr.R.Rajavel (2017), Wear Analysis of 410 Stainless Steel Material by Hardening Process , International Journal of Advanced Engineering, Management and Sciences, Volume 3, Issue 5, PP No 613-615. (Indexed by Thomson Reuters) – ISSN 2454-1311

 

15.  Dr.Ram.Subbiah, B.Uday Babu, C.Dinesh Reddy, D.Praharsha, E.Ajay Babu, Dr.R.Rajavel (2017), Characterization of 410 Stainless Steel Material by Vacuum Tempering Process , International Journal of Advanced Engineering, Management and Sciences, Volume 3, Issue 5, PP No 613-615. (Indexed by Thomson Reuters) ) – ISSN 2454-1311.

16.  Ch. Vijay Krishna, Dr.Ram Subbiah (2017), Wear Conduct Investigation of 410 SS by Cryogenic Process, SSRG International Journal of Mechanical Engineering (SSRG - IJME), V 4(11), PP No 1- 4. ISSN 2348 – 8360

17.  Ch. Vijay Krishna, Dr.Ram Subbiah (2017), Wear Conduct Examination of AISI 410 SS by Vacuum Tempering Process, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), – volume 4 Issue 11 November 2017, PP No 46-49. ISSN 2278 – 1684.

18.  B.Sagar, Dr.Ram Subbiah (2017), Dry Sliding Wear Resistance Investigation of 316L by Flame Hardening Process, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), – volume 4 Issue 11 November 2017, PP No 42-45. ISSN 2278 – 1684.

19.  B.Sagar, Dr.Ram Subbiah (2017), Dry Sliding Wear Resistance Investigation of 316l by Induction Hardening Process, International Journal of Scientific Research in Science & Technology, – Volume 3 Issue 8, November 2017, PP No 1043-1047. ISSN 2395 – 6011

 

20.  B.Sagar, Dr.Ram Subbiah (2017), Comparative Sliding Wear Studies Among Flame Hardening and Induction Hardening Processes on 316l Stainless Steel, International Journal of Scientific Research in Science & Technology, – Volume 3 Issue 8, November 2017, PP No 1212-1216. ISSN 2395 – 6011.

 

21.  L.Rajeev Reddy, Dr.Ram.Subbiah (2016), Salt Bath Nitriding of 316L Austenitic Stainless Steels, International Journal of Aerospace & Mechanical Engineering, Vol.03, Issue – 5, pp 14 -18. ISSN 2393 – 8609.

 

22.  L.Rajeev Reddy, Dr.Ram.Subbiah (2016), Improvement of 316L Stainless Steel Properties by Gas Nitriding, International Research Journal of Engineering & Technology, Vol.03, Issue-11, pp 14 -18. ISSN 2395 – 0072.

 

23.  P.Giridhar, Dr.Ram.Subbiah (2016), Effect of TiN vs AlTiN PVD Coating Thickness on 316L Austenitic Stainless Steel Material to Improve Wear Resistance, International Journal of Aerospace & Mechanical Engineering, Vol.03, Issue – 5, pp, 19 - 22. ISSN 2393 – 8609.

 

24.  P.Giridhar, Dr.Ram.Subbiah (2016), Effect of AlTiN PVD Coating Thickness on 316L Austenitic Stainless Steel Material to Improve Wear Resistance, International Research Journal of Engineering & Technology, Vol.03, Issue-9, pp 162 - 165. ISSN 2395 – 0072.

 

25.  P.Giridhar, Dr.Ram.Subbiah (2016), Impact of CrN PVD Coating Thickness on 316L Austenitic Stainless Steel Material to Improve Wear Resistance, International Research Journal of Innovative Research in Science & Technology, Vol.03, Issue-5, pp 96 -100. ISSN 2349 – 6010.

26.  Dr.Ram.Subbiah, S.Satheesh, Shoan C.Sunny, G.Kishore, K.Fahad, Dr.R.Rajavel. (2014), Assessment of Properties on 316LN Austenitic Stainless Steel Material under Low Temperature Liquid Nitriding Process, International Journal of Innovative Engineering and Exploring Research, Vol.3, pp 69-71. Impact Factor 1.0 - ISSN 2278 – 3075.

 

27.  Dr.Ram. Subbiah, P. Karthick, R.Manjunath, T. Prasanth, R. Ilavarasan, Dr.R. Rajavel, (2014), Experimental Investigation on Hardness of Gas Implanted AISI 316LN Austenitic Stainless Steel, International journal of Inventive Engineering and Sciences, Volume-2, Issue-3, pp 51-55. Impact Factor 1.0. ISSN 2319 – 9598.

28.  Ram.Subbiah, Dr.R.Rajavel. (2012), Microstructure and Wear Characteristics of 316LN Austenitic Stainless Steel Material by Plasma Nitriding Process, International Review of Applied Engineering Research, Vol.02, pp 31-35.

29.  Ram. Subbiah, Dr.R.Rajavel. (2012), Improving the Hardness of AISI 316LN Austenitic Stainless Steel Material by Gas and Plasma Nitriding Process, International Journal of Engineering Research and Technology, Vol.05, pp 73-79. Impact Factor 1.0. ISSN 2278-0181.

30.  Ram.Subbiah, Dr.R.Rajavel. (2012), Investigation of 316LN Austenitic Stainless Steel by Gas and Salt Bath Nitriding Process, International Review of Applied Engineering Research, Vol.2, pp 23-30.

31.  Ram. Subbiah, Dr.R.Rajavel. (2011), Effect of Salt Bath Nitriding on 316LN Austenitic Stainless Steel Material, International Journal of Material Science, Vol.06, No.4, pp 465-471. ISSN 0973 – 4589